Posted in

What is the warranty on a new telescopic boom lift?

If you’ve ever rented or used a telescopic boom lift for construction, facility maintenance, or industrial tasks, you know how critical this equipment is for reaching high, hard-to-access spaces safely. As a telescopic boom lift supplier who’s worked with hundreds of contractors, facilities teams, and event planners over the past 12 years, one of the most common questions I get isn’t about lift height, load capacity, or fuel efficiency—it’s about warranty. Most people assume all warranties are the same, or that they cover every part that breaks, but that’s far from the truth. After all, a boom lift is a big investment—sometimes running $70,000 to $150,000, depending on its size and features—so understanding what your warranty covers (and what it doesn’t) can save you thousands in unexpected repair costs down the line. Telescopic Boom Lift

Let’s start with the basics: a new telescopic boom lift’s warranty isn’t a one-size-fits-all document. It’s tailored to how the machine is built, what components it uses, and how the manufacturer stands behind their work. From my experience, the standard base warranty for most mid-sized telescopic boom lifts—those with 40 to 60 feet of vertical reach—covers the unit for two full years or 2,000 hours of operation, whichever comes first. For our brand’s larger industrial models, which can reach 185 feet and handle heavier loads, we extend that base coverage to three years or 3,000 hours, because we use higher-grade materials and reinforced components built for more intense, frequent use.

Now, what does that base warranty actually cover? Let’s break it down. For most manufacturers, including the one I represent, the base warranty covers defects in materials and workmanship for all major structural parts: the boom arm, the chassis, the turntable, and the lifting cylinders. That means if a weld on the boom cracks unexpectedly under normal use, or a hydraulic cylinder leaks because of a manufacturing flaw (not because you damaged it by hitting a wall), you’ll get that part repaired or replaced for free—no labor cost, no parts charge. The base warranty also covers the engine, which is a key component, but only the engine itself, not any attachments or modifications you might add. We use industrial-grade diesel and gas engines from reputable suppliers like Kubota and Cummins, so we back those for two years or 2,000 hours, same as the rest of the unit.

But here’s where most users get tripped up: the base warranty usually doesn’t cover wear-and-tear items, and it definitely doesn’t cover damage from misuse, neglect, or accidents. Things like brake pads, filters, hydraulic hoses, tires, and even batteries are considered consumable parts, so they’re only covered for the first 90 days or 250 hours. That makes sense—you’d expect to replace a set of brake pads on a truck every few years, and boom lifts are no different. Where people run into trouble is when they assume that if a hose leaks after six months, it’s a manufacturing defect. More often than not, a damaged hose is from improper storage, dragging it across a rough floor, or not tightening connections correctly—all things the warranty won’t cover.

Beyond the base warranty, there are extended coverage options that many of our clients take advantage of, especially those who use their boom lifts daily or run them in harsh conditions like construction sites in extreme heat or cold. We offer two extended warranty tiers, both tailored to fit different needs. The first is a Power Coverage plan, which extends the base warranty on all major components—including the engine, transmission, and hydraulic system—for up to two more years or 2,000 additional hours. The second is a Full Coverage plan, which adds the consumable parts (like hoses, filters, and even labor costs) to the extended coverage, so almost everything is covered for up to five years or 5,000 total hours. I always advise clients who plan to run their boom lift for more than 40 hours a week to opt for one of these extended plans, because even a small hydraulic repair can cost $1,500 or more out of pocket if it’s not covered.

It’s also important to clarify what the warranty doesn’t cover, because that’s a big source of frustration. First, any damage from misuse or modification. For example, if you modify the boom lift to carry more weight than its rated capacity, and the arm bends, the warranty is void—we don’t cover damage from intentional overloading. Similarly, if you add non-OEM parts (aftermarket parts that aren’t made by the original manufacturer) that cause a part to fail, that voids the warranty. We require all repair and maintenance work to be done by certified technicians, too—if a general mechanic who’s not trained on boom lift hydraulics works on your unit and breaks something, that’s not covered. Environmental damage is another exclusion: if your boom lift is stored outside in a flood zone or exposed to corrosive chemicals (like in a chemical plant), rust or corrosion damage isn’t covered, because that’s a result of your storage conditions, not a manufacturing flaw.

One thing I’ve learned over the years is that many operators don’t realize that warranty validity is tied to proper maintenance. That’s not a loophole—it’s a common-sense rule. Manufacturers like us require that you follow the maintenance schedule outlined in the operator’s manual. That means changing the oil and filters every 250 hours, inspecting the hydraulic system before every use, and greasing all moving parts as recommended. If you skip a required maintenance task, and that leads to a part failing, the warranty won’t cover that repair. For example, if you don’t change the hydraulic fluid for two years, and a clog causes a pump to break, we can’t be held responsible. We send all our new clients a free maintenance checklist when they take delivery, and our in-house service team offers annual maintenance training for anyone who wants it—because keeping your lift in good shape isn’t just good practice, it’s required to keep your warranty active.

Another point that’s often overlooked: transport and storage terms. If you damage your boom lift while moving it from a job site to a warehouse, or while storing it improperly (like leaving the boom extended in direct sunlight for months), that’s not a covered expense. The warranty applies only to damage that occurs during normal, intended operation and proper storage. I always advise clients to take photos of their boom lift during delivery, and to do a pre-use inspection every time they pick it up from our lot—this helps catch any pre-existing damage before you start using it, so you don’t get stuck with a repair bill that’s not your fault.

What about used boom lifts, you might ask? I don’t recommend buying a used boom lift without verifying its warranty status, if any. Most used units have their base warranty expired, and if they have an extended warranty, it’s often not transferable. That’s why buying new is often a smarter choice—you get the full factory warranty, plus the peace of mind that comes with a unit that hasn’t been beaten up by years of heavy use. We also offer a 30-day satisfaction guarantee on all new telescopic boom lifts, so if you get it and decide it’s not the right fit for your projects, you can return it for a full refund (minus any delivery fees) within 30 days—something you won’t get from a private seller.

Let me share a real example from a client of mine last year to illustrate how this works. A construction company in Dallas bought three of our 50-foot telescopic boom lifts for a residential development project. They used them for 3,000 hours over 18 months, which was within their three-year base warranty period. Last year, one of the units developed a leak in the main lifting cylinder. The client contacted our service team, and a certified technician went out to inspect it. We found that the leak was from a micro-defect in the cylinder’s seal, which was a manufacturing error—so we replaced the seal and the cylinder for free, no labor charge. The client didn’t have to pay a dime for that repair, which saved them over $2,000. That’s exactly what the warranty is for: standing behind the work we do when things go wrong, not because the user did something wrong, but because the machine wasn’t built perfectly.

Another client, a small maintenance company, didn’t opt for the extended warranty on their 40-foot boom lift. Six months after purchase, they ran the lift into a steel beam on a job site, damaging the hydraulic hose. That hose is a consumable part, and the damage was from misuse, so they had to pay $350 out of pocket to replace it. If they’d taken a minute to review the warranty exclusions, they would have known to be more careful around overhead structures, or to budget for those small repair costs. It’s not about hiding the fine print—it’s about making sure our customers are informed so they don’t get surprised.

At the end of the day, the warranty on a new telescopic boom lift is more than just a piece of paper. It’s a promise from the manufacturer that the machine will work as intended, that if something goes wrong because of how it’s built, you won’t be left holding the bill. But that promise comes with responsibilities: use the machine as it’s designed, keep up with maintenance, work with certified technicians, and follow the rules. If you do all that, the warranty will protect you from most unexpected repair costs for years.

If you’re in the market for a new telescopic boom lift and want to talk through warranty options, or learn more about how our coverage works for different use cases, our team is here to help. Whether you’re a small contractor with occasional high-reach needs, or a large industrial company that needs a fleet of lifts, we can match you with the right model and warranty plan to fit your budget and workload. Don’t hesitate to reach out to our sales team to discuss your requirements and get a personalized quote.

Diesel Scissor Lift References:

  • Manufacturer’s Warranty Guidelines for Telescopic Boom Lifts, 2024 Edition
  • Occupational Safety and Health Administration (OSHA) Requirements for Aerial Lift Warranty Compliance, 2023
  • National Construction Equipment Association (NCEA) Best Practices for Aerial Lift Maintenance and Warranty, 2022

Mantall Heavy Industry Co., Ltd.
Mantall Heavy Industry Co., Ltd. is well-known as one of the leading telescopic boom lift manufacturers and suppliers in China, featured by quality products and good service. Welcome to buy discount telescopic boom lift made in China here from our factory. For pricelist and quotation, contact us now.
Address: NO.62, Binhai Avenue, Binhai Industrial Park, Qidong City, Jiangsu Province, China
E-mail: Gloria@mantall.com
WebSite: https://www.mantallawp.com/