Posted in

What is the standard size of steel flanges?

If you’ve ever stood in a manufacturing plant, pipeline construction site, or even a commercial HVAC room, you’ve probably stared at a set of circular, metal discs bolted between pipes and thought, “That’s a steel flange.” As someone who’s been a steel flange supplier for over a decade, I hear this question more times a month than I can count: “What’s the standard size of steel flanges?” The short answer isn’t as simple as a single number—there’s no one-size-fits-all dimension, because flanges are built to match specific piping systems, pressure requirements, and industry standards. Let me walk you through the real, practical sizes I source, stock, and deliver every day, because when you’re working on a project that needs to hold pressure and not leak, guessing isn’t an option. Steel Flanges

First, let’s cut through the confusion right out the gate. Standard steel flange sizes aren’t arbitrary—they’re dictated by three global standards that I rely on to keep my warehouse stocked and my customers’ projects on track: ANSI/ASME B16.5 (the North American workhorse), ASME B16.47 (for larger, heavy-duty flanges), and EN 1092-1 (the European standard, widely used across Asia too). These standards set two core measurements that matter most to anyone buying flanges: nominal pipe size (NPS) and flange class. NPS is the size of the pipe the flange attaches to, and class is the pressure rating—think of class 150 as low-pressure, class 300 as medium, and class 600, 900, even 1500 as high-pressure.

Starting with NPS, because that’s the first number most people ask about. For small-to-medium applications—think residential plumbing, commercial HVAC, or small process piping—standard NPS sizes for steel flanges start at NPS ½, which translates to an inside diameter (ID) of approximately 0.84 inches (21.3 mm). This is the tiny flange you’d find on a residential water line or small gas line. The sizes go up incrementally: NPS ¾ has an ID of ~1.05 inches (26.7 mm), NPS 1 is ~1.32 inches (33.4 mm), NPS 2 is ~2.38 inches (60.3 mm), and so on. For most industrial projects that use the B16.5 standard, the standard NPS range is from ½ up to 24 inches, which covers 90% of the flanges I sell for everyday projects.

But here’s where a lot of new buyers trip up: the flange’s outside diameter (OD), bolt circle diameter (BCD), and number of bolts don’t just scale up with NPS—they also depend on the class. A NPS 4 flange in class 150 isn’t the same size as a NPS 4 flange in class 300, and installing the wrong one will lead to leaks or even failure. For example, a NPS 4 class 150 flange has a BCD of 8 inches (203 mm), requires 8 bolts, and has an OD of 9 inches (228.6 mm). The same NPS 4 class 300 flange has a larger BCD of 9.5 inches (241.3 mm), needs 8 bolts, and has an OD of 10.75 inches (273 mm)—all because higher pressure means a wider, thicker flange to distribute stress. When I’m pulling a flange for a customer, I always confirm both NPS and class first, because mixing those up is a common, costly mistake.

If you’re working on larger projects—like municipal water pipelines, petrochemical refineries, or power plants—you’ll need flanges that go beyond NPS 24, and that’s where ASME B16.47 comes in. This standard covers NPS 26 all the way up to NPS 60, and it splits into two series: Series A (MSS SP-44) and Series B (API 605). Series A is generally used in petrochemical and refinery applications, while Series B is more common in water and general industrial piping. The standard sizes here range from NPS 26 (OD ~28.75 inches / 730 mm) up to NPS 60 (OD ~66.5 inches / 1689 mm). These are big, heavy flanges—some weigh hundreds of pounds each—but they’re standard for large-diameter pipelines that need to hold high pressure over long distances.

For my customers working outside North America, EN 1092-1 is the go-to standard, and it uses nominal sizes called “nominal diameters” (DN) instead of NPS. DN is a metric measurement that roughly matches NPS, so DN 15 is equal to NPS ½, DN 25 is equal to NPS 1, DN 100 is equal to NPS 4, and so on. The pressure ratings here are PN, so PN 16 is roughly equivalent to class 150, PN 40 to class 300, and PN 100 to class 600. This is the standard I stock extra heavily for customers in Europe, Australia, and parts of the Middle East, because not every supplier keeps metric flanges on hand.

Now, let’s get into the practical details that only a supplier who handles hundreds of flange orders a month would know. A common question I get is about the thickness of standard flanges. For a NPS 1 class 150 slip-on flange, the typical thickness is around 0.5 inches (12.7 mm), while a NPS 1 class 300 slip-on flange is thicker, at ~0.75 inches (19 mm). Weld-neck flanges, which are the most reliable for high-pressure applications, are thicker at the base to distribute stress from the pipe, so a NPS 4 class 300 weld-neck flange is about 1.1 inches (28 mm) thick. Blind flanges, the ones used to cap pipes, have a thicker face to handle pressure from the closed end—same NPS and class blind flange will be 10-20% thicker than a matching weld-neck flange.

A lot of first-time buyers also ask about flange face types, which tie into size too, because the face needs to match the gasket. The most common standard faces are raised face (RF), where the sealing surface is a raised ring around the bolt holes, flat face (FF), used for low-pressure non-critical applications, and ring-type joint (RTJ), for ultra-high pressure (class 900 and above). The face diameter for each of these is standardized too—for a NPS 4 class 300 RF flange, the face diameter is ~6.5 inches (165 mm), so you know exactly what size gasket to order.

I’ve seen so many projects delayed because someone ordered the wrong size flange, and it’s almost never because of NPS alone. Last year, I had a customer on a refinery turnaround order 20 NPS 6 class 300 weld-neck flanges. They sent me the NPS and class, but didn’t specify the standard—they assumed it was ANSI B16.5. What they got in their inventory was a European EN 1092-1 DN 150 PN 40 flange, which is almost the same NPS and class but has a slightly different bolt hole spacing. By the time they realized the mistake, their crew was standing idle on the job site, and they lost thousands of dollars in labor costs. That’s why, as a supplier, I always include a note on every order confirmation asking for both the standard and any special requirements, but it’s also why I tell buyers to double-check those two details before placing an order.

Another thing that surprises new customers: there are no “standard” sizes for specialty flanges, but the majority of what I sell are in-stock standard sizes. My warehouse carries over 20,000 flange pieces, and 85% of them are NPS ½ to NPS 24 in classes 150, 300, and 600, matching ANSI B16.5. The remaining 15% are the larger B16.47 flanges and EN 1092-1 metric flanges for specific projects. Custom flanges—like those with drilled holes for specific pipe spacing, or non-standard face types—are available, but they take lead time, cost more, and should only be used if a standard flange won’t work.

Let’s also talk about why standard sizes matter beyond just fitting. When everyone uses the same standard sizes, you can source flanges from any supplier, anywhere in the world, without custom tooling. That’s why I can send a flange to a job site in Texas and another identical one to a site in Singapore, and both will fit perfectly. For industries like oil and gas, where downtime costs tens of thousands of dollars an hour, that consistency is non-negotiable. If every flange was a custom size, supply chains would collapse, and projects would take months longer to complete.

As someone who’s been in this business for 12 years, I’ve worked with everyone from small plumbing contractors to global manufacturing companies. For the small contractor doing a residential repair, they’ll likely need NPS ½ to NPS 2 flanges, class 150, RF face, ANSI B16.5. For the commercial HVAC installer working on a 10-story building, it might be NPS 4 to NPS 8, class 150 or 300. For the petrochemical plant upgrading a process line, it’s NPS 12 to NPS 24, class 600 or 900, RTJ face. The sizes change, but the standardization stays the same.

Now, if you’re working on a project and not sure which standard or size you need, don’t guess. I’ve built my business on being a reliable resource, not just a supplier of steel flanges. I can help you cross-reference NPS to DN, explain the difference between slip-on and weld-neck flanges, and confirm exactly what size will fit your piping. Whether you need a single flange for a small repair or 500 flanges for a large construction project, I’ve got the inventory and knowledge to get it right the first time.

If you’re ready to discuss your flange needs, or have questions about standard sizes, pressure ratings, or material specifications, reach out for a procurement consultation. I’m here to help you avoid the delays and mistakes I’ve seen hundreds of customers make over the years, so your project stays on schedule and within budget.

Hastelloy Pipe Fittings References
ANSI/ASME B16.5. Pipe Flanges and Flanged Fittings: NPS 1/2 Through NPS 24. American Society of Mechanical Engineers, 2020.
ASME B16.47. Large Diameter Steel Flanges: NPS 26 Through NPS 60. American Society of Mechanical Engineers, 2019.
EN 1092-1. Flanges and Their Joints—Circular Flanges for Pipes, Valves, Fittings and Accessories, PN Designated—Part 1: Steel Flanges. European Committee for Standardization, 2021.


Zhengzhou Huitong Pipeline Equipment Co., Ltd.
Zhengzhou Huitong Pipeline Equipment Co., Ltd. is one of the leading steel flanges manufacturers and suppliers in China. Find the best quality and durable steel flanges with competitive price here from HT PIPE. Welcome to place orders, and the customized orders are also accepted in our factory.
Address: 7 Floor,4th Building,Jinyin Modern City,Jinshui District,Zhengzhou City,China,450000
E-mail: specialmetal@htpipe.com
WebSite: https://www.oepipe.com/