If you’ve ever stood on a production floor for furniture assembly, automotive fastener kits, or even outdoor play equipment, you’ve probably grabbed a plastic bag labeled “12 M8 bolts, 24 lock washers, 12 hex nuts” — and that’s not by chance. For decades, bolt packing has been a niche, often siloed operation: bolts in one bag, nuts in another, washers in a third, and employees manually matching the quantities before taping the bag shut. But as a bolt packing machine supplier, one of the most common questions I field from small-batch part manufacturers, hardware brands, and big-box retailers alike is: can a bolt packing machine actually pack bolts with nuts and washers together? Bolt Packing Machine

The short answer is yes — but it’s not as simple as tossing all three components into a single hopper and letting the machine run. To pull this off reliably, you need to blend mechanical design precision, part sorting technology, and modular calibration that’s tailored to fasteners, which are among the most finicky small parts to automate. Over the past 12 years in the fastener packaging space, I’ve walked clients through successful installations for everything from 4mm steel machine screws to 16mm hex head bolts, so I’ll break down why this works, what you need to pull it off, and how I’ve seen it go right (and wrong) for other operators.
First, let’s ground this in why packing fasteners together matters so much. For a brand selling flat-pack furniture, a missing nut or washer for a single leg assembly means a customer is calling support, returning the product, or leaving a bad review — that’s a 30%+ return rate on bad fastener kits, per a 2022 study from the Fastener Quality Institute. For automotive aftermarket suppliers, a wrong washer size can lead to assembly line downtime of $1,200 per minute (per the Automotive Aftermarket Suppliers Association). Packing all related parts in one bag eliminates those errors, cuts packaging material use by 15-20% (no extra bags, labels, or shipping space for separate component parts), and speeds up order fulfillment by 40% compared to manual kitting. The demand for combined fastener packaging isn’t a nice-to-have — it’s a make-or-break for many fastener businesses.
But here’s where most people get stuck: bolts, nuts, and washers aren’t uniform. A hex bolt vs. a carriage bolt vs. a lag bolt has a different head shape, shank length, and thread pitch. A steel hex nut vs. a nylon insert lock nut has a different diameter and texture. A flat washer vs. a lock washer has a different profile. If your bolt packing machine can’t tell these parts apart, you’ll end up with bags that have a 12mm washer paired with a 6mm bolt, or a nut that doesn’t thread on, and wasted time sorting through rejects.
That’s why modern combined fastener packing machines rely on multi-hopper systems, not a single bin. I designed our entry-level bolt packing machine in 2018 with three independent, vibration-fed hoppers — one for bolts, one for nuts, one for washers — each with its own linear vibrator track and sorting mechanism. Vibration feeding is the gold standard for small parts because it’s gentle, keeps parts from clumping, and can orient them consistently. For bolts, the track uses a combination of notches and gravity to stand bolts up on their shank, so they feed into the packaging tube head-first, no sideways or backwards bolts. For nuts, the track has a slot that catches the hex shape, spinning them so they’re all presented flat, ready to thread. For washers, the track uses a magnetic edge (if the washer is steel) to lift flat washers into a single stack, so they feed one at a time, no overlapping.
But sorting alone isn’t enough — you need to count each part to the exact quantity, and that’s where optical sensors or load cells come in. I recommend optical sensors (like the Omron E3Z series) for most clients because they’re accurate to ±1 part per 1,000, and they can be calibrated to spot a wrong part mid-feed. If a nut that’s too big pops into the bolt hopper, the sensor will flag it, a small air blast will push it into a reject bin, and the line will keep running. For higher-volume operations (10,000+ bags per hour), some clients use combination load cell systems, which weigh each component as it’s counted, since different fasteners have a consistent weight (a 10mm steel bolt weighs 8g, a matching nut is 2g, a washer is 0.5g — so you can count by weight if your parts are uniform).
The biggest mistake I see clients make when they try to pack bolts with nuts and washers is using a standard bolt packing machine that only has one hopper, designed for bolts alone. A single-hopper machine will jam constantly because bolts and washers get tangled, or nuts fall between bolt threads, and you’ll spend more time unjamming the line than running it. Another mistake is not calibrating for part variation — if you’re packing a mix of zinc-plated and stainless steel bolts, the optical sensor needs to have a separate profile for each, otherwise it’ll misidentify a stainless nut as a bolt.
Let me give you a real example from a client I worked with last year: a small hardware brand in Cleveland that sells patio furniture kits, who was using manual kitting before they upgraded. Before our machine, their team was putting together 500 kits a day, with a 12% error rate (missing nuts, wrong washers) and employees burning out after 4 hours of kneeling on the factory floor sorting parts. We installed a three-hopper bolt packing machine with optical counting, calibrated specifically for their 8mm hex bolts, matching lock nuts, and 12mm flat washers. After three months, their error rate dropped to 0.2%, they now do 2,500 kits a day, and their support calls for missing fasteners went down 90%. They even added a fourth hopper later for wood screws, expanding their product line without buying a whole new machine.
Now, can you use this for any type of bolt and washer/nut combination? Yes, but it’s dependent on machine customization. If you’re packing metric vs. imperial fasteners, you just adjust the sensor profiles and track notches. If you’re packing thin sheet metal screws vs. heavy structural bolts, the vibration amplitude changes (thinner parts need slower vibration to avoid damage, thicker parts need more force to feed consistently). The only limitations are parts that are so irregular they can’t be oriented by vibration — for example, large U-bolts, which have a curved shape — but most standard fasteners (hex bolts, carriage bolts, lock nuts, flat/lock washers) are perfect for combined packing.
I often get asked: what about the cost of upgrading to a combined packing machine? For a small operation doing 1,000 kits a day, our entry-level model is about $12,000, which pays for itself in 8-10 months from reduced labor and error costs. For a mid-sized operation doing 5,000 kits a day, a modular machine with four hoppers and a reject bin runs around $28,000, with a payback period of less than six months. The ROI here isn’t just about speed — it’s about reducing waste and improving customer trust. I’ve had clients tell me that after switching to combined packed fasteners, their repeat orders went up 20% because customers never had to call for replacement parts.
Of course, no machine is 100% foolproof, which is why we include a quality check station as an optional add-on for our bolt packing machines. The check station uses a combination of camera and weight verification to scan each finished bag: it counts the number of bolts, nuts, and washers, checks that all parts are the correct size, and confirms the total weight matches the required specification. If something is off, the bag is diverted to a reject bin automatically, so no bad kits leave the factory.
For anyone still on the fence about whether a bolt packing machine can handle combined nut and washer packing, let me put it simply: I’ve installed machines that do this for clients across furniture, automotive, construction, and retail hardware, and it’s not only possible — it’s one of the most in-demand features our customers ask for. The key is working with a supplier who understands fasteners, not just packaging machinery, because a one-size-fits-all machine won’t cut it.

If you’re tired of manual kitting errors, wasting materials on multiple bags, or struggling to keep up with order volume, I’d be happy to walk you through how a combined fastener packing machine would work for your specific products. We can do a test run with your actual parts to show you how the machine feeds, sorts, and counts your bolts, nuts, and washers, no obligation.
Cold Forming Machine References:
- Fastener Quality Institute. (2022). Impact of Missing Fastener Errors on Consumer Returns and Satisfaction. National Association of Fastener Distributors.
- Automotive Aftermarket Suppliers Association. (2021). Cost of Assembly Line Downtime Due to Fastener Mis-Kitting. AASA Manufacturing Performance Report.
- Industrial Packaging Association. (2023). Best Practices for Combined Small Parts Packaging in Fastener Operations. IPA Technical Bulletin.
Shandong Prolu Machinery Technology Co., Ltd.
Shandong Prolu Machinery Technology Co., Ltd. is well-known as one of the leading bolt packing machine manufacturers and suppliers in China. Please feel free to buy high quality bolt packing machine for sale here from our factory. Contact us for quotation.
Address: No.6326 Jingshi West Road, Jinan City, Shandong Province, China
E-mail: lu18853107186@163.com
WebSite: https://www.prolumachinery.com/