If you’ve ever worked on a plumbing, irrigation, or DIY plumbing project, you’ve probably come across PP compression fittings—they’re the workhorses of pipe connections because they’re easy to install, no messy soldering or glue, and super reliable when installed right. But I’ve lost count of how many times a customer has shot me a DM or called me panicking, asking, “Wait, what thread type do I use for my PP compression fitting? I messed up the connection and now my pipes are leaking everywhere.” That’s why I’m breaking this down, straight from a supplier who’s been selling these fittings for over a decade, no fancy jargon, no AI copy-paste garbage—just real talk. PP Compression Fittings

First, let’s get one thing straight: PP (polypropylene) compression fittings don’t just have one thread type across the board. It’s not like every screw is the same. The thread depends entirely on what you’re connecting to, what system it’s going in, and even where in the world your project is. Most people mix up two main categories right off the bat: male and female threads, but even within those, there are standard types you need to know. If you get this wrong, you’re not just wasting time—you’re dealing with leaks, which mean callbacks, pissed-off homeowners, or even ruined irrigation lines that’ve been running for weeks. Let’s start with the basics so no one’s confused.
The most common thread types for PP compression fittings, especially in North America (which is like 70% of my client base), are NPT and MNPT. Wait, let’s translate that for the non-plumbers out there: NPT stands for National Pipe Thread, and MNPT is Male National Pipe Thread. NPT is tapered, not straight— that’s a huge point. Tapered threads get smaller towards the end, so when you tighten the fitting, the threads squeeze together, create a seal on their own (with a little Teflon tape or pipe dope, obviously, don’t skip that part). A lot of new builders try to skip Teflon and end up with a drip within a week, so I always remind customers: even if the threads are tapered, a thin wrap of Teflon goes a long way.
You’ll see MNPT most often on the male ends of PP compression fittings that connect to metal pipes, valves, or equipment. Like, if you’re hooking up a new water heater, the fitting that screws into the heater’s outlet port is almost always MNPT. What about FPT? That’s Female Pipe Thread, which is the female counterpart to NPT. So if you have a fitting that’s connecting to a male NPT pipe, you’ll want a female end of the PP compression fitting that’s FPT. Easy, right? But wait, there’s straight threads too, and that’s where a lot of people mess up.
In Europe and a bunch of other global markets, BSP threads are the standard. BSP is British Standard Pipe, and unlike NPT, you have two types of BSP: BSPP (Parallel) and BSPT (Tapered). BSPP is straight, not tapered. That means it doesn’t create a seal just from tightening—you need a sealant, like an O-ring or a gasket, not just Teflon. If you take a BSPP thread and try to screw it into an NPT port, it won’t seat right, and you’ll have a leak. I’ve had a guy bring me a fitting from a trip to Germany, trying to use it on a US irrigation pipe, and he wasted two hours trying to force it before we pointed out the thread mismatch. That’s the kind of mistake I want to help people avoid, not see them do.
Now, why do PP compression fittings use these specific thread types, anyway? PP is a rigid plastic, right? So the threads need to be durable enough to handle the tightening torque without stripping, but also compatible with whatever metal or plastic pipe they’re connecting to. Back in the day, people used metal compression fittings, but PP is lighter, corrosion-resistant, way cheaper, and works just as well for low-pressure applications (like residential plumbing, lawn irrigation, chemical handling for small farms). The thread type is engineered to match the pressure rating, too. For example, a 1-inch PP compression fitting with NPT threads is rated for up to 150 PSI, which is more than enough for most home water lines, but if you’re running a high-pressure industrial system, you’d use a different thread, but that’s a niche case—99% of my customers don’t need that.
Wait, let’s talk about the parts of a PP compression fitting, because the thread isn’t just on the end that connects to your pipe. The compression nut, the olives (those little plastic or rubber rings), the body—all work together, but the threaded end is the critical part that connects to your existing pipe or valve. Let’s use a common example: if you’re replacing a section of copper pipe with PP for a kitchen sink. The copper pipe has a male NPT thread, so your PP compression fitting’s female end will be FPT, and the male end will slip over the new PP pipe, no thread needed there. That’s the beauty of compression fittings: one side threads to your old metal pipe, the other side just slides over the new plastic pipe and you tighten the nut, no glue, no solder. I’ve installed these myself for my own bathroom remodel, so I know how easy it is once you get the thread right.
Another mix-up I see all the time is between “nominal pipe size” and actual thread size. Like, a ½-inch NPT thread isn’t the same as a ½-inch PP pipe. The nominal size is the inside diameter of the pipe it’s made for, not the actual thread measurement. That’s why you can’t just grab any ½-inch fitting and expect it to work—you have to match both the thread type (NPT, BSP, etc.) and the nominal size. Last month, a landscaper ordered a bunch of PP compression fittings, showed up to pick them up, and realized he ordered BSP threads instead of NPT for his US project. Had to rush him a new order, which delayed his job a couple days. I now add a big note on every product page reminding people to confirm their thread type before ordering, but some folks still skip that.
What about specialty thread types? For industrial applications, sometimes you’ll see JIC threads, but those are for hydraulic systems, not your typical residential or commercial plumbing. Or metric threads, which are common in Europe. If you’re working on a project outside North America, always double-check what thread your local supply stores sell. I have a lot of international clients, so I stock both NPT and BSP threads for PP compression fittings, just to cover all bases. If you’re a homeowner, though, you’re almost certainly dealing with either NPT (US, Canada) or BSP (EU, UK, Australia).
Now, let’s talk about how to check the thread type if you’re not sure. Don’t guess— that’s the worst thing you can do. Grab a thread gauge from any hardware store, they’re like $10, super easy to use. Or, if you have an old fitting or pipe that fits your system, take it to your local supply place and match it. If you’re ordering online, just send a photo of the end you need to connect to, and we’ll tell you what thread type to get. That’s what I do for my customers—no trick questions, no upselling the wrong fittings, just helping them get the right part the first time. I hate when people come back frustrated because they got the wrong thread, so I make it a point to walk them through it, even on a 10-dollar order.
A common mistake new installers make is forcing the threads too tight. PP threads are strong, but if you crank the nut so hard it cracks the fitting, that’s a whole other problem. The rule of thumb: hand-tight, plus one quarter turn with a wrench. If it leaks after that, you might need more Teflon tape, not more force. And remember, tapered threads (NPT) are designed to seal as you tighten, while straight threads (BSPP) need a gasket or O-ring to create that seal. If you mix that up—using only Teflon on BSPP, or no sealant on NPT—you’ll get a leak, guaranteed.
Now, as a supplier, I can tell you that the thread type isn’t just a small detail—it’s the difference between a job that takes 10 minutes and one that takes 2 hours, between a leaky faucet that drives you crazy and a connection that lasts 10+ years. That’s why I prioritize accurate labeling on all my fittings, and why I make sure every customer has access to info about thread types before they order. I’ve been in this game long enough to know that the smallest details are what make a good supplier vs. a bad one.

If you’re still not sure what thread type you need, don’t guess—reach out. I don’t do automated chatbots or generic FAQs. Just send us a message, tell us what you’re connecting (water heater, irrigation line, bathroom pipe, whatever), and we’ll help you confirm the right thread for your PP compression fitting. No pressure, no weird sales pitches, just real advice from someone who’s installed these fittings hundreds of times, not just read a manual.
Butt Fusion Fittings Reference:
- Plastic Pipe and Fittings Association. (2022). Compression Fitting Installation Guidelines for Residential Plumbing.
- European Committee for Standardization. (2021). Standardized Thread Types for Thermoplastic Pipe Systems.
- National Association of Water Companies. (2023). Low-Pressure Pipe Connection Best Practices.
Qingdao Polyfusion Machinery Co., Ltd.
As one of the most professional pp compression fittings manufacturers and suppliers in China, we have world-leading production equipment and strong manufacturing capabilities. Please feel free to buy bulk high quality pp compression fittings from our factory.
Address: Chengyang Industry Zone, Chengyang, Qingdao, Shandong, China
E-mail: export01@qdpolyfusion.com
WebSite: https://www.polyfusionfittings.com/